Home › Guides › Banging pipes and water hammer
Guide
Banging pipes when you close a tap: water hammer and how to stop it
Pipes that bang when you close a tap, or when the washing machine or toilet valve shuts, are usually water hammer: fast-moving water stops suddenly, and the pressure surge shakes the pipe. The fixes are fixing the pipe properly, slowing or absorbing the surge, and lowering the pressure if it is too high. A banging geyser is different, and should be checked.

- Since 2013
- COCs issued
- 5.0 from 21 Google reviews
- 24-hour emergency call-outs
- Free written estimates
What causes it
Level, New Zealand’s building-research guide, describes water hammer as a pressure surge when flow stops suddenly, most common in high-pressure systems. We could not find a South African manufacturer’s guide to it, so this one is theirs, with the local rules added. The usual triggers:
- Lever taps and mixers, which close in a fraction of a second
- Solenoid valves on washing machines and dishwashers
- Spring-closing valves, and pumps switching on and off
- Toilet float valves closing as the cistern fills
- High water pressure or fast flow through thin pipes, which make all of these worse
In the Winelands, the Helderberg or Cape Town? We can come and fix it.
ProSol is a plumbing and solar company based in Stellenbosch. We work in Stellenbosch, Franschhoek, Paarl, Wellington and Klapmuts, across the Helderberg (Somerset West, Strand, Gordon’s Bay) and in Kuils River and Brackenfell. Send a photo on WhatsApp and Malan tells you what it needs.
Plumber in the Cape Winelands · Plumber in the Helderberg · Plumbing and solar geysers in Cape Town
What you can check yourself
- When exactly does it bang? On a tap closing, on the machine’s fill, on a toilet filling? That tells you which valve to look at.
- Does it bang after the water has stopped, in a run of knocks? That points to loose pipes, not only the valve.
- Is anything loose where you can see it, in a roof space or at a meter?
What stops it
- Pipes fixed firmly, with rubber-lined clips, so they cannot move and knock
- A water hammer arrestor fitted before the appliance or valve that causes it
- A pressure-limiting valve, if high pressure is part of the problem
- Replacing a worn valve that closes too sharply or shudders
These are plumber’s jobs, particularly in the roof space or behind a wall. The City of Cape Town’s by-law also says you may not connect anything to the installation that causes damaging pressure surges, so it is not only about the noise.
If the noise comes from the geyser
Banging or knocking from the geyser itself is a different thing. Kwikot lists it among the warning signs to report: sediment, a failing element or too much heat can all cause it. Switch the geyser off at the board if it is loud and you see water, and have it looked at.
Questions people ask
Why do my pipes bang when I turn off a tap?
The water is moving fast and stops suddenly, which sends a pressure surge along the pipe. If the pipe is loose it knocks against whatever is near it. This is called water hammer.
Why do my pipes bang when the washing machine is on?
Washing machines fill through solenoid valves, which snap shut. A water hammer arrestor fitted before the machine usually stops it, along with firm fixing of the pipes.
Why do my pipes bang when the toilet is flushed?
Usually the float valve closing as the cistern fills. A worn valve can shudder and make it worse, so that is the first thing to replace.
Is water hammer dangerous?
It can damage joints, valves and appliances over time, so have it fixed rather than leaving it. Banging that comes from the geyser itself should be checked soon.
What is a water hammer arrestor?
A small fitting with a cushion inside that absorbs the surge when a valve shuts. A plumber fits it close to the valve causing the problem, upstream of the appliance.
Related
- Low water pressure in the houseLow water pressure in one tap, only on the hot side, or all over the house? How to tell the cause, what the municipality is responsible for, and what fixes it.
- Taps, toilets and mixersDripping tap, toilet that keeps running, leaking mixer or shower? ProSol fixes the everyday plumbing in Stellenbosch and the Winelands. Send a photo.
- Geyser maintenanceKwikot says service a geyser every 3 to 4 years, or every second year on hard water. What a service covers, what you can check yourself, and what you cannot.
- Geyser repair and replacementBurst or failing geyser in Stellenbosch, Somerset West or Paarl? ProSol repairs and replaces geysers to SANS 10254, with the certificate your insurer asks for.
Areas we serve
What customers say
“During the huge April 2024 storm in Stellenbosch, I phoned Malan at Prosol on Sunday morning. I had thought with so many houses damaged here, it would be nearly impossible to get help at short notice. By 10 am his two men were here.”
“Prosol plumbing is very proffesional, efficient and cares about their ckients. They are very reliable and the staff is very patient and pay attention to detail.”
“Malan & his Prosol team were commented as being very professional and efficient with the geyser install at Consol Shop Stellenbosch.”
Tell us what’s wrong. We’ll tell you what it takes.
Phone for anything urgent, at any hour. Otherwise send a photo and a few words on WhatsApp, and Malan comes back to you with what it needs. Planned work gets a free written estimate before we start.
