Home › Guides › Geyser maintenance

Guide

Geyser maintenance: what to check, and how often

Kwikot, the geyser maker, says a geyser should be serviced every three to four years on good water and every second year on hard or bad water. A service means draining it, checking the anode, element and thermostat, and removing scale. You can look at the overflow pipe, the drip tray and the setting yourself; the rest is a plumber’s job.

Geyser with a Geyserwise controller fitted beside it
  • Since 2013
  • COCs issued
  • 5.0 from 21 Google reviews
  • 24-hour emergency call-outs
  • Free written estimates

What a service covers

  • Draining the geyser and flushing out sediment
  • Checking the magnesium anode, and replacing it if it has been used up
  • Checking the element and thermostat
  • Removing scale and sludge
  • Checking the T&P valve, pressure control valve and vacuum breakers

Kwikot ties the anode to what the inspection finds, not to a fixed calendar. An anode protects the tank, so an unchecked one is how a sound cylinder becomes a burst one.

In the Winelands, the Helderberg or Cape Town? We can come and fix it.

ProSol is a plumbing and solar company based in Stellenbosch. We work in Stellenbosch, Franschhoek, Paarl, Wellington and Klapmuts, across the Helderberg (Somerset West, Strand, Gordon’s Bay) and in Kuils River and Brackenfell. Send a photo on WhatsApp and Malan tells you what it needs.

Plumber in the Cape Winelands · Plumber in the Helderberg · Plumbing and solar geysers in Cape Town

What you can safely check yourself

  • The overflow pipe outside: a little water while the geyser heats is normal, a constant flow is not
  • The drip tray and the ceiling under it: water or a damp patch means call us
  • The temperature setting: Eskom and Kwikot recommend 60°C
  • The outside of the geyser for rust, at least once a year, which MiWay also recommends
  • A geyser blanket, and insulation on the first metre or two of hot pipe, which slow the heat loss

Geyser overflow pipe dripping · Geyser not heating or tripping

What you may not do yourself

Draining and flushing, and testing or replacing the T&P and pressure control valves, are plumber’s jobs, according to Kwikot. In the City of Cape Town, the by-law says only a qualified person may replace a fixed water heater or its protective devices (section 47(1)(b)), and in Stellenbosch only a plumber may replace a fixed water heater.

What should be there on a compliant install

A service is also a good moment to check the install against Kwikot’s summary of SANS 10254, which applies to new and replacement installs after 8 June 2001:

  • A drip tray with an overflow piped to the outside
  • Vacuum breakers on the hot and cold pipes
  • Safety valve and expansion valve overflows piped separately to the outside

Geyser repair and replacement

Solar geysers and heat pumps

Kwikot recommends an inspection every year on a solar geyser, because a failed solar side keeps heating on the element without telling you. If you have changed your water heater, note that the City of Cape Town’s by-law also says the owner must notify the City when a fixed water heater, heat pump or solar panels are installed or changed.

Solar geyser repairs and servicing · Heat pump water heater installation

Questions people ask

How often should a geyser be serviced?

Kwikot says every three to four years on good water, and every second year on hard or bad water. Kwikot recommends a yearly inspection on a solar geyser.

How often should a geyser anode be replaced?

There is no fixed interval in the manufacturers’ guidance we read. Kwikot ties it to the inspection: the anode is checked at each service and replaced if needed.

Can I drain my geyser myself?

Kwikot lists draining and flushing as a job for a plumber. A geyser holds a lot of very hot water under pressure, and draining it wrongly can burn out the element when the power comes back.

Does a geyser blanket really help?

It slows heat loss, especially on an older geyser or one in a cold roof space, and so does insulating the first metre or two of hot pipe. It is a small job that pays back in less heating.

What are the signs a geyser needs a service?

Rusty or discoloured hot water, banging or rumbling while it heats, water in the drip tray, a constant flow from the overflow, or a geyser that takes much longer to heat than it did.

Related

Areas we serve

What customers say

“During the huge April 2024 storm in Stellenbosch, I phoned Malan at Prosol on Sunday morning. I had thought with so many houses damaged here, it would be nearly impossible to get help at short notice. By 10 am his two men were here.”

Andries Gouws · Google review

“Prosol plumbing is very proffesional, efficient and cares about their ckients. They are very reliable and the staff is very patient and pay attention to detail.”

Siphokazi Qokela · Google review

“Malan & his Prosol team were commented as being very professional and efficient with the geyser install at Consol Shop Stellenbosch.”

Junaid Samad · Google review

Read all 21 reviews on Google

Tell us what’s wrong. We’ll tell you what it takes.

Phone for anything urgent, at any hour. Otherwise send a photo and a few words on WhatsApp, and Malan comes back to you with what it needs. Planned work gets a free written estimate before we start.